This kitbash is another that I have been wanting to make for quite a while, based on the picture below. I have spent a lot of time gathering the information together for it, as well as all of the kit for the figure. But it is finding the time for it, that has always been a problem for me, especially as I have to make four separate new pages for this kitbash.

The pages are as follows, one page is for the white uniform that I wanted to look dirty, another page is for the alterations I wanted to make to the Dragon snow shoes. Two pages are for the ski’s and the poles that I have had to re-model to look like the one’s in the picture on the right. My reference pictures for this I have assembled from my Detling Visit in 2011, as well as a lot of help I have received from my fellow modeller Heeresbergführer.

So after finding some spare time I have finally got started with the figure and the diorama base that I wanted to make for it as well. Because of the amount of parts I wanted the figure to have I have based it on this reference picture, plus it will be loaded up like my other Gebirgsjager Climber figure.


Headsculpt

The headsculpt and body I have used for this kitbash is from the Soldier Story EODM figure, as I do like the expression on the face. I have given it a paint with some of the Model Color 540 Matt Medium to lose the slight shine it had, and then a wash over as usual with some Light Brown pastel chalk. The top three pictures are the new headsculpt as I got it loose, and the lower three pictures are of the headsculpt after I have given it a pastel treatment.

Uniform

The tunic for the figure as shown below on the left, was made by Toys City with the trousers from Dragon, I have given the clothing a light soaking in a thin warm coffee mixture, to get a darker and work look to them. As well as a Dragon winter helmet cover and a pair of winter mittens. All of which have been placed on the top of another pair of new white winter trousers to show the weathering differences I have made to the uniform.

To add a start of a weathering effect I have tried the Coffee trick above as mentioned by Bob a Job. I have added a section on my German Alterations Page 4, about how I have tried this effect for myself, and I am impressed with how different the uniform looks now. As it has added an overall discoloured dirty effect to the uniform, and by rubbing with my fingers on it, I can choose which places to keep the dirty marks. Usually I do not bother to put a uniform under the winter clothing. But for this figure I wanted to bulk out the material, so that the outer white uniform would crease up better.

These pictures above show how I have also added some extra weathering with some Mud powders on top of some Brown pastel chalks, the chalk was first added and rubbed in between my fingers on the bottom edges. I then went over the top of this the lighter Mud weathering powder, so that it highlighted the tops of the creases. Two pictures above show a pair of brand new white trousers against the weathered uniform, as a comparison.

Cap Cover

Another item that I wanted for this figure is a white cap cover that he is wearing, and as shown with the help of a fellow modeller Heeresbergführer.

I have been able to use his idea, of cutting a finger off a full size cotton glove to make the Bergmütze cover and I have found with the cotton gloves I used, it has a close weave which makes it look knitted in this scale. Thepictures above are of the cap and cover on this figure, the goggles I have used also help to shape the cover.

Equipment

For this figure I wanted to use a pair of crampons on the boots, and I have been helped to do this by a forum post about how to tie them. The picture above show how I have weathered them and re-painted the straps, and them fitted to the boots.

Above is another repainted Dragon holster, with a DiD shovel and bayonet which has had the covers repainted with Black acrylic paint to cover the threads, both of them were then weathered with pastel chalks.

With this figure I wanted a pair of MP40 magazine pouches, so I used a pair of DiD Jakob Blau cloth pouches that I have weathered with paint and pastels. Thpicture on the right above, is a Toys City canteen that I have taken the straps off of, because I wanted something different for this figure. So I took the straps from a Dragon canteen from the Hinrich Weller figure and placed the Toys City canteen inside it.

Some of the flock material did come off when I removed the straps, but luckily the new straps have covered it up. The picture on the left shows the various pieces fitted to a Toys City belt, to save space on it I have put the pistol over the top of the bread bag.

Skis and Poles

These are pictures of the Dragon skis and poles that I have altered for this figure, and to explain this better I have had to make two separate pages about how I did this – Skis.

Backpack

This is the Toys City backpack that I am using with this figure, which has been altered like the one I have on my German Alterations 2 page. Then onto this I have fastened the snow shoes with some leather straps I made, which I put through the pair of loops on top of the bag. I also altered the DiD mess tin as I did on my German Alterations 2 page, this was also strapped onto top of the bag.
I then added some ropes under the front flap, plus the helmet and cover. The picture on the right, shows the underneath of them and how they have had to be secured.

Weapons

The main weapon for this figure is a plastic MP40 pistol made by Toys City, which I have first painted the bakelite parts with Black acrylic paint. Once dry I went over the top with a diluted wash of Black acrylic paint. Then when dry I gave it a drybrush with some Gunmetal weathering powders, which has added a nice highlighted effect to the weapon.

One thing I did notice with this weapon from my research, is that the magazine is usually a slightly different colour to the gun itself as it is made separately.

So with my alterations of this weapon I took the magazine off when I did the repaint, and the result is that it is a lighter Gunmetal colour to the gun itself.

Various pictures of the figure

Assembled Figure

This is the finished figure mounted onto the snow base I made for it


Many thanks to the 85th Gebirgsjager Living History Group for all of their help.

Thanks to Bob a Job for his idea about using coffee to change the colour of the snow suit.

And a special thank you to Heeresbergführer for all of the detailed help with my Gebirgsjager figures.